Product Details
The 258XL power pipe cutter is built for square cutting large-diameter steel pipe in the field or shop. Designed for 8 in. to 12 in. schedule 10/40 steel pipe, it uses displacement cutting action to deliver fast cuts with minimal burr. Powered by the RIDGID No. 700 Power Drive and fed by a hydraulic foot pump, it helps one operator cut pipe without abrasive dust, sparks, or open flame. It is also well suited for prep work on pipe intended for groove joining.
- Cuts 8 in. to 12 in. schedule 10/40 steel pipe for large-diameter fabrication work
- Displacement cutter design produces square cuts with minimal burr instead of removing pipe material
- Hydraulic foot pump lets the operator control feed rate throughout the cut
- No abrasive dust, dangerous sparks, or open flame during operation
- Cuts 21 ft lengths or nipple lengths of pipe and is ideal for groove-joining prep
Item Specifications
-
12 in. (300 mm)
-
8 in. (200 mm)
-
21 ft or nipple lengths
-
33 RPM (no load)
-
Schedule 10/40 steel pipe
-
194 lb
